Best Home Thermostat System - Top 10 for 2024

【 Before purchasing, please check whether the wiring port matches your device 】 Suuwer S701 Nonprogrammable Electronic Thermostats, Single Stage 1 Heating and 1 Cooling

For use with Central Gas, Oil, or Electric Furnaces Systems（ compatible with 85% of systems ）

Dual Powered by 24VAC Power or 2 AAA Batteries, C-wire is not required. （Shell color; off-white ）

Does Not Work with Aux Heat Pump and Multi-Stage Systems, Does Not Work RV, Does Not Work 120/240V Electric Baseboard / Line Volt.

Very Suitable for Middle-Aged and Elderly People, Easy-to-read Digital 4.5 sq. in.

Display with Large Characters and Blue Backlight Big Separate Buttons for Easy Setting

Separate Heating and Cooling Swing (Cycle Rate) _ Low Battery Indicator

Room Temperature Calibration Adjustment _ 5 Minute Compressor Delay Protection (Selectable on or off)

Precise Temperature Control with +/- 1 Degree in Fahrenheit and Celsius for Ultimate Consistent Control.

Friendly Service: 2-year Worry-Free Warranty and 24h Customer Service,

Works with compatible Nest thermostats [1]; the sensor tells the thermostat what the temperature is in the room where it’s placed and the thermostat uses that reading to control when the system turns on or off to keep that room the temperature you like.Google Nest Thermostat Compatibility: Communicates temperature to compatible Google Nest thermostats up to 50 feet away. Low Energy Bluetooth Connection: Up to 6 Google Nest Temperature Sensors supported per connected thermostat and up to 18 Nest Temperature Sensors supported per home.Please refer to the product description section below for all applicable legal disclaimers

Put different temperature sensors in different rooms, like the baby’s room or living room

Control your Nest sensor in the Nest app; set a schedule and choose which room to prioritize when [2]

Compatible with the Nest Learning Thermostat and the Nest Thermostat E [1]

The Nest Temperature Sensor is easy to set up; just hang it on the wall or place it on a shelf

The Nest sensor runs on batteries so it works in most homes; batteries can last up to 2 years

The Nest Temperature Sensor is a great addition to your smart home; its simple design blends into any home

Google Nest Thermostat Compatibility: Communicates temperature to compatible Google Nest thermostats up to 50 feet away.

Low Energy Bluetooth Connection: Up to 6 Google Nest Temperature Sensors supported per connected thermostat and up to 18 Nest Temperature Sensors supported per home.

Please refer to the product description section below for all applicable legal disclaimers

No more programming: With Auto-Schedule, the Google Nest Learning Thermostat learns from you and programs itself..Product note: You can also check your system’s compatibility before purchasing a Nest thermostat with our online Nest Compatibility Checker on the Google Nest support page

Home/Away Assist: don't heat or cool an empty home. Home/Away Assist adjusts the temperature after you leave.

Remote control: Control your thermostat from anywhere using the Nest app.

Know more, save more Check your Energy History to see how much energy you use and why.

Look for the Leaf: The Nest Leaf appears when you choose a temperature that saves energy.

PRIVACY PROTECTION*: Sensi won’t sell your personal information to third parties

SAVE ABOUT 23% ON HVAC ENERGY*: The ENERGY STAR-certified Sensi smart thermostat can help you save energy with features like flexible scheduling, remote access, and usage reports

EASY DIY INSTALLATION: Use the built-in level and step-by-step app instructions for a quick installation. Works with HVAC equipment found in most homes. Common wire (c-wire) is not required in most applications

SMART MAINTENANCE: Sensi can help monitor the performance and efficiency of your HVAC system by delivering valuable usage reports, alerts about your equipment, and maintenance reminders like filter replacement

SIMPLE CONFIGURATION: Looks and feels like a thermostat. Has buttons and fits the same space as a traditional thermostat so you don’t have to patch and paint your walls

The RTH6360D offers flexible 5-2-Day or 1-Week programming so you can set your own schedule for comfort and energy conservation.

Backlit LCD display shows current room temperature and set point temperature simultaneously.

Smart Response Technology learns how long it takes to achieve the right temperature at the right time and automatically runs your system to get to your desired temperature when you want it.

Features auto changeover between heat and cool and reminder alerts for low batteries and filter changes.

Program is retained in memory in the event of a power outage so you can be confident your comfort stays intact.

The UWP mounting system, included mounting hardware, and quick install guide can have your thermostat up and running quickly.

Real-time clock automatically adjusts for daylight savings time

Compatible with: forced air (gas, oil or electric), hot water and steam, and heat pumps with electric backup.

Does NOT work with electric baseboard heat (120-240V).

Large touchscreen display makes it easy to set your preferred temperature or set a weekly schedule for automated adjustments.

Set home and away temperatures to help save energy when you're not home. Temporary and permanent hold settings are also available for extended absences from home.

7-Day menu-driven programming with 4 periods per day.

Backlit touchscreen display shows current room temperature and set point temperature simultaneously.

Simple and straight forward to install and use. The thermostat also has a real-time clock so it will automatically adjust for Daylight Savings Time.

Smart Response Technology allows the thermostat to learn how long the furnace and air conditioner take to reach programmed temperature settings, so you're comfortable at the time you expect.

Auto changeover is helpful in climates where both air conditioning and heating are used on the same day. When the system is set to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature so you can always be comfortable.

To protect the system and your compressor from damage, this thermostat contains a setting that forces the compressor to wait a few minutes before restarting. If activated during installation, the screen will also display an alert when it's time to replace your filter and alert you of low batteries.

Battery-powered or option to hard-wire.

Compatible with- single stage heating and cooling, multistage heating and cooling, heating only, cooling only, furnace (warm air), central air conditioning, heat pump without auxiliary heat, heat pump with auxiliary heat, hot water, steam or gravity, 750 millivolt, and gas fireplaces.

5-2 DAY PROGRAMMING: Separate programs for the weekdays and weekends with 4 program periods per day including wake, leave, arrive and sleep

PRECISE TEMPERATURE CONTROL: Precise temperature control of +/- 1 degree Fahrenheit.

DIGITAL DISPLAY: The display panel is backlit with an intuitive interface for one-touch access to setpoint temperature

EASY INSTALLATION: Easy to install yourself and works with many heating/cooling systems, plus heat pumps without auxiliary heat

REMINDERS: Built-in battery change and filter change reminders

RETAINS PROGRAMMING: Retains programmed memory in event of power outage

COMPATIBLE WITH: Gas, oil or electric furnace, Central air conditioner, Hot water system with or without pump, Millivolt system, Central heating and cooling system, Heat pump without auxiliary/backup heat.

CANNOT be used on heat pumps with backup heat, multistage systems, radiant or line voltage systems.

ENERGY STAR certified smart thermostat for home that helps you save energy and stay comfortable.Product note: You can also check your system’s compatibility before purchasing a Nest thermostat with our online Nest Compatibility Checker on the Google Nest support page

The Nest Thermostat is designed to work without a C wire in most homes, but for some systems, including heating only, cooling only, zone controlled, and heat pump systems, you’ll need a C wire or other compatible power accessory. Lock feature: No

Nest Thermostat turns itself down when you leave, so you don’t waste energy heating or cooling an empty home; easily program an energy efficient schedule in the Google home app on your Android or iPhone

Remote control lets family members change the thermostat temperature from anywhere on a phone, laptop, or tablet[1]

Savings Finder looks for more ways your thermostat can help you save, and suggests tweaks to your schedule in the app; check with your energy provider to learn more about rebates and more ways to save on a Nest thermostat

Smart thermostat with HVAC monitoring, which looks out for your heating and cooling systems; sends an alert if something doesn’t seem right, along with helpful reminders to make maintenance easier[2]

It’s easy to install your thermostat, typically in 30 minutes or less, with everything you need included in the box; it’s compatible with 85% of heating and cooling systems

Control the temperature with your voice using smart home devices that work with Google Assistant or Alexa[3]

Nest Renew makes it simple to support clean energy right from home; it works with your Nest Thermostat[5] to help you automatically prioritize your usage[6] to times when energy is cleaner or less expensive

Please refer to the product description section below for all applicable legal disclaimers denoted by the bracketed numbers in the preceding bullet points (e.g., [1], [2], etc.)

This Wi-Fi smart home thermostat enables you to set your clock, read outdoor temperatures, automate temperature control, and program remotely through the Watts Home mobile app which is available for iOS and Android devices

Smart home compatible with Amazon Alexa and Hey Google for home automation voice control and you can enable remote software updates

It has a modern and sleek design; a 4.3 inch digital touchscreen display; three home screen options: clock, control settings, or weather; and portrait and landscape mounting options.

This floor heating thermostat can compensate for outdoor weather conditions, auto shut-off for warm weather temperatures, and there is also a maximum floor temperature setting to protect different types of flooring

Track your energy use, receive email/text notifications, and access away terminal features at home or remotely as a well as connect to optional equipment: SunStat Rely R4 and ConnectPlus Smart Sensor

There are multiple support and data features such as heat output, a voltage detector, momentary testing, a diagnostic screen, an easy set up function, a help feature, and works with 120 and 240 voltage.

Easy DIY installation: Step-by-step guided installation in the Wyze app (less than 30 min). Work with 90% home systems, C-wire adapter included for home without C-wire; Check your heating & cooling system compatibility on the Wyze website with the Wyze Thermostat Compatibility Checker.

Control from the app: You can control the temperature from your phone no matter where you are, or turn it off when you are away; Keep pets comfortable and prevent frozen plumbing; Share the control with guests and family through the Wyze app.

Works with voice assistants: Adjust the thermostat with your voice by asking Alexa or Google assistant.

7-Day scheduling: Create schedules for Home, Sleep, and Away for every day so you don’t have to keep going back and forth to your thermostat.

Usage tracking with insights: Like an energy-saving gnome inside your phone, the Wyze app will recommend actionable insights based on your usage to help reduce wasted energy.

Automatically turns on and off based on the built-in motion sensor and phone location to save energy.